After mentioning that I had gotten a CPC and attached a DIN to it so that I could connect it to the TZXDuino I have had a few requests on how to do it so I thought I'd try a guide. You will need to purchase 180 degree 5 pin female din that is chassis mountable. This is the type that I purchased except mine also had a mounting plate too. The standard 6128 cassette connector is wired like this. Each pin is numbered on the back so that you know which one you are connecting it too so don't worry if the pins are in different positions as it depends on whether you are looking from the connection side or the soldering side. I would use different coloured wiring for each type of connection. I used the following Ground - Black Data Input - White Data Output - Pink Remote Control - Brown At this point I added 4 male pins to the end of my wiring so that I could build a connector so that I could easily disconnect the DIN should I need to work on the cassette drive. N...