Skip to main content

Posts

Showing posts with the label UEF

New CAS/TZXDuino firmware

New firmware . TZXDuino 1.15.3 Adapted the MAXDuino ID19 code and TurboMode for ZX80/81. To access Turbo Mode for ZX80/81 and Electron please switch Turbo Mode On in the menu Also added UEF Chunk 117 which allows for differing baudrates in BBC UEFs. Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here. CASDuino 1.24 Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here.

New Instructions For Updating Firmware With Arduino IDE

Over the past few months I have been helping people via Facebook, either my personal page or through the official Arduitape page, to update their firmware using the Arduino IDE and it became painfully apparent that I needed top update the instructions so that they are relevant to the latests IDE and firmware. Thanks to Covid-19 I have time on my hands and have up[dated the PDF so if you would like to read it and give me feedback I would be most appreciative. The instructions are for Windows and the PDF can be downloaded from here.

Firmware Updates And Dragon CAS File Information

Firmware Updates Primarily I have updated the firmwares to include RGB I2C 16x2 LCD screen but there have also been some improvements made to TZXDuino and CASDuino. Arduitape 1.8 can be downloaded from here. CASDuino 1.22.1can be downloaded from here. Changes . Added RGB I2C 16x2 LCD Speed improvements Improved compatibility with TOSEC Dragon CAS files TZXDuino 1.15.1 can be downloaded from here. Changes Added RGB I2C 16x2 LCD Improved UEF support Dragon CAS file information. This is a bit of boring technical information in regards to Dragon CAS files from TOSEC and why they didn't work before. Unlike MSX CAS files Dragon and CoCo CAS files start with a byte hex value of 55. To be recognised as a CAS file by emulators it only needs to have one byte with hex value of 55 at the beginning. To be recognised as a Dragon/CoCo CAS file by CASDuino it requires a minimum of 8 bytes with a hex value of 55 bytes. To be recognised by a real computer it requires aroun...

TZXDuino 1.14.2

TZX Block type ID15, bane of my existence when it comes to TZXDuino I found, with the help of users, that enabling ID15 screwed up many other TZX files that used to work under 1.13 on the MSX and Spectrum. To fix this I've added yet another option to the Menu. It's not how I would like to have done it but it works. If you're not trying to load a musical loader or a Direct Record (usually a Firebird game) on an Amstrad CPC then switch ID15 off. There are very few TZX files for the Spectrum that use ID15 and so far there are no TSX files for the MSX that use ID15. Also please make sure you turn the Gremlin Loader off as well as that can also stop files loading properly. Turn these options on separately if a file fails to load. IF after that it still fails then please let me know the file, where it's from, and what computer you are trying it on. TZXDuino 1.14.2 can be downloaded from here.

UEF Playback added to TZXDuino

Thanks to the work of Kernel Crash we have added uncompressed UEF playback to TZXDuino. This means that Acorn machines can be added to the list of computers that can use TZXDuino. There is standard mode and a Turbo mode that can be switched on in the menu. The turbo mode loads at 1500 baud and does improve the loading time on an Acorn Electron. There is also a 1550 and 1600 option in the TZXDuino.h file but not all Electrons can handle the faster speed. You can read Kernel Crash's blog here. You can download the TZXDuino 1.11 from here.