ArduiTape/CASDuino/TZXDuino - The cassette player replacements

After mentioning that I had gotten a CPC and attached a DIN to it so that I could connect it to the TZXDuino I have had a few requests on how to do it so I thought I'd try a guide. You will need to purchase 180 degree 5 pin female din that is chassis mountable. This is the type that I purchased except mine also had a mounting plate too. The standard 6128 cassette connector is wired like this. Each pin is numbered on the back so that you know which one you are connecting it too so don't worry if the pins are in different positions as it depends on whether you are looking from the connection side or the soldering side. I would use different coloured wiring for each type of connection. I used the following Ground - Black Data Input - White Data Output - Pink Remote Control - Brown At this point I added 4 male pins to the end of my wiring so that I could build a connector so that I could easily disconnect the DIN should I need to work on the cassette drive. N...

It's been a while since I've published anything on my progress on converting things to the Maple Mini so I thought I'd keep you up to date. I have converted TZXDuino to the Maple Mini and it is working but not properly. For some reason, even though it is using the same values as the Nano the frequency of the output is higher. So much so that fastloaders cannot be recognised and TAP and simple TZX cannot all register with the Spectrum. Oddly this would indicate that a microsecond for the Maple Mini is different to the microsecond for the Arduino Nano, yet the files play for a similar length of time. It's all highly confusing and I've put the project on the back burner for a while so I can concentrate on working any errors out of the CAS/TZXDuino Shield PCB. The good news being that when I was trying to figure out what was going wrong I noticed that TZX2WAV which we had been using as a benchmark to test our coding actually has a typo in it a decodes slower than the TZ...

Inspired by Piotr Bugaj and his TZXDuino Shield I thought I'd take his PCB design and add the 2.5mm socket and some right angle buttons and get it so it will fit into a PP9 case. This is a whole new thing for me as I have never designed a PCB in my life or used Diptrace before. Luckily it's quite an intuitive piece of software that's easy to use. After adding a design for a PCB mounted 2.5mm and also the buttons I managed to design a PCB that should work. Now however it's finding a reasonably priced manufacturer for a couple of prototypes before maybe a production run. If you're interested in looking at the Diptrace and gerber file you can download them from here.