Skip to main content

Finally the PCD8544. Almost.

For the last few months I've been talking about how to add the PCD8544 (also known as the Nokia) screen to the devices.
Unfortunately this has not been as easy as I'd first hoped largely due to differences in the screens. Some work well with the standard 5v of the Arduino Nano, others need the voltage in to be 3.3v. Some need resistors others don't. Finally however I can start to write things up properly though.
The software has been written and is fully functioning for a while and whilst there are no improvements in what the ArduiTape/CASDuino/TZXDuino can do, it does use less memory than the other screens and looks a little nicer, in my opinion.
CASDuino Turns Two.
I have been reminded by my Facebook posts that today I completed my first CASDuino specific PP9 build two years ago today.
I used the PP9N Evatron case as I was inspired by one of the TAPuino builds and it's a nice case to work with.
Certain small things have changed since then, button caps, reset switch, different screens, but the basic design of my build has been the same since then.

 Happy birthday to my little monster.
Labels:

Comments

Post a Comment

Popular posts from this blog

TZXDuino Firmware 1.16, 1.17, and an updated TZXDuino Instruction Manual

  TZXDuino 1.16 In TZXDuino 1.15.3 I added a bug that lowered the volume of some Spectrum TZX files and all ZX80/81 TZX, O, and P files so they didn't work for many people. I fixed this for 1.16. You can download TZXDuino 1.16 from here.   TZXDuino 1.17 The MAXDuino team added ORIC TAP playback functionality to their firmware which I have adapted to TZXDuino. I don't have an Oric Atmos to test it on so I have been recording the playback and loading on Oricutron and everything I have tried has worked. Obviously things may be different on a real machine. Team MAXDuino have also added a speed up function for Oric TAP files which I will add to TZXDuino 1.18 but so far I have been unable to get it to work correctly. You can download TZXDuino 1.17 from here.   And finally there is the updated instruction manual which now tells you how to access Turbo mode for the Electron, ZX80, and ZX81. It also says for Oric but that has not been implemented yet. You can download the pdf of v...
24 comments
Read more

Arduitape on the ZX Spectrum

How to use the Arduitape with the ZX Spectrum. Sorry I've been a little quiet recently but I've managed to get my grubby little mitts on a ZX Spectrum + 48k and have been testing it with the Arduitape. Unlike the MSX and other 8-bits the only limitations on frequency of the .WAV files is no higher than 22050 Hz due to the limitations of the software used. I was expecting to have all the difficulties of the MSX but I've tested lots of files at different frequencies and they all work fine. I've been using TZX2WAV to do the conversions. Open a command window. Type  tzx2wav -f [desired frequency] [filename].tzx [filename].wav   and that's it. I have been trying to experiment with a programme called OTLA which can output various formats of Spectrum, ZX81, Amstrad, and MSX files that playback at a higher rate and essentially turn a 5 minute loading game in to a 30 second loading game however it outputs at either 44100Hz or 48000Hz which is too high for the Ardui...
40 comments
Read more

New CAS/TZXDuino firmware

New firmware . TZXDuino 1.15.3 Adapted the MAXDuino ID19 code and TurboMode for ZX80/81. To access Turbo Mode for ZX80/81 and Electron please switch Turbo Mode On in the menu Also added UEF Chunk 117 which allows for differing baudrates in BBC UEFs. Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here. CASDuino 1.24 Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here.
13 comments
Read more