Skip to main content

New Instructions For Updating Firmware With Arduino IDE

Over the past few months I have been helping people via Facebook, either my personal page or through the official Arduitape page, to update their firmware using the Arduino IDE and it became painfully apparent that I needed top update the instructions so that they are relevant to the latests IDE and firmware.

Thanks to Covid-19 I have time on my hands and have up[dated the PDF so if you would like to read it and give me feedback I would be most appreciative.

The instructions are for Windows and the PDF can be downloaded from here.

Comments

Popular posts from this blog

TZXDuino Firmware 1.16, 1.17, and an updated TZXDuino Instruction Manual

  TZXDuino 1.16 In TZXDuino 1.15.3 I added a bug that lowered the volume of some Spectrum TZX files and all ZX80/81 TZX, O, and P files so they didn't work for many people. I fixed this for 1.16. You can download TZXDuino 1.16 from here.   TZXDuino 1.17 The MAXDuino team added ORIC TAP playback functionality to their firmware which I have adapted to TZXDuino. I don't have an Oric Atmos to test it on so I have been recording the playback and loading on Oricutron and everything I have tried has worked. Obviously things may be different on a real machine. Team MAXDuino have also added a speed up function for Oric TAP files which I will add to TZXDuino 1.18 but so far I have been unable to get it to work correctly. You can download TZXDuino 1.17 from here.   And finally there is the updated instruction manual which now tells you how to access Turbo mode for the Electron, ZX80, and ZX81. It also says for Oric but that has not been implemented yet. You can download the pdf of v...

Arduitape on the ZX Spectrum

How to use the Arduitape with the ZX Spectrum. Sorry I've been a little quiet recently but I've managed to get my grubby little mitts on a ZX Spectrum + 48k and have been testing it with the Arduitape. Unlike the MSX and other 8-bits the only limitations on frequency of the .WAV files is no higher than 22050 Hz due to the limitations of the software used. I was expecting to have all the difficulties of the MSX but I've tested lots of files at different frequencies and they all work fine. I've been using TZX2WAV to do the conversions. Open a command window. Type  tzx2wav -f [desired frequency] [filename].tzx [filename].wav   and that's it. I have been trying to experiment with a programme called OTLA which can output various formats of Spectrum, ZX81, Amstrad, and MSX files that playback at a higher rate and essentially turn a 5 minute loading game in to a 30 second loading game however it outputs at either 44100Hz or 48000Hz which is too high for the Ardui...

New CAS/TZXDuino firmware

New firmware . TZXDuino 1.15.3 Adapted the MAXDuino ID19 code and TurboMode for ZX80/81. To access Turbo Mode for ZX80/81 and Electron please switch Turbo Mode On in the menu Also added UEF Chunk 117 which allows for differing baudrates in BBC UEFs. Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here. CASDuino 1.24 Added a Spectrum Font for OLED 1306 users converted by Brendan Alford. Option added to userconfig.h Added File scrolling by holding up or down buttons. By Brendan Alford. Download from here.